Oil Pump Pick Up Tube O Ring

Oil Pump Pick Up Tube O Ring. Genuine bmw sets the standard for your vehicle. In six cylinder 3.0/3.2 applications this seal is used on each end (two total) of the oil line that exits the oil pump and enters the cylinder block.

Oil pump o ring and oil pan drop LS1TECH Camaro and from ls1tech.com

In six cylinder 3.0/3.2 applications this seal is used on each end (two total) of the oil line that exits the oil pump and enters the cylinder block. This procedure, which is carried out by the oil pump. Joined jun 6, 2020 posts 531 reaction score 556

Is That A Factory O Ring Or Did Some One Go In There And Replace It?

In five cylinder and 2.8/2.9 applications this seal one time at the union between the oil pick up tube and the oil pump body. According to this site the correct part number is gm 12557752: I did use two floor jacks and another hand to help wedge it back up in place.

This Procedure, Which Is Carried Out By The Oil Pump.

Genuine bmw sets the standard for your vehicle. I replaced with a new red flepro one. Then i changed to the factory red one.

Hello All, 2005 Gmc Sierra 1500 4X4 L33 5.3 With 208K Miles.

It was a bluish green one that was in good shape. Oil pump pickup tube o ring color from factory. When it comes to your nissan 240sx, you want parts and products from only trusted brands.

This Can Cause An Oil Leak.

› see more product details. Since the oil pump is usually behind the crank pulley, oil may splatter around the engine bay. Also look for genuine bmw parts built by our expansive list of oem and oes suppliers including:

Read >>  2005 Dodge Stratus 2.7 Water Pump Replacement

I Am Doing A Cam Swap And Installed A Melling 10296.

Just for giggles, i reinstalled the stock pump. I noticed a gap between the flange of the pickup tube and where it goes into the pump. I did the oil pump pickup tube o ring too.