How To Replace Shock Cord On Pop Up Camper

How To Replace Shock Cord On Pop Up Camper. Both cords measure 20 feet. Once all of the latches are released, you can insert the camper crank into place and begin turning.

T.W. Evans Cordage Elastic Nylon Bungee Shock Cord 1/4"x50
T.W. Evans Cordage Elastic Nylon Bungee Shock Cord 1/4"x50 from www.sears.com

Most main cables are 3/16 inch in diameter. I picked up 20 ft of 1/4 at our local ace last week the day before we left to go camping. The end of the cotter pin is bent at an angle to lock the castle nut in place.

Unbolt The Main Cable From The Winch Attachment, And Pull The Free End Through The Harness Square.

The end of the cotter pin is bent at an angle to lock the castle nut in place. Start by unhooking the latches that hold the top of your camper down. A common fail point for coleman and fleetwood pop up camper bed bows are right in the middle.

I Picked Up 20 Ft Of 1/4 At Our Local Ace Last Week The Day Before We Left To Go Camping.

Coleman & fleetwood shock cord kit. We nare pretty sure that a cable is broken as the crank is loose. We were cranking up and was in.

Read >>  Pollo Asado Con Arroz Y Papas Fritas

Designed To Upgrade And Replace The Original Shock Cords On Coachmen Clipper Pop Ups.

If the cable was crimped rather than bolted in place, replace the cable swage sleeves with new ones. Once all of the latches are released, you can insert the camper crank into place and begin turning. Bungee cord replacement kit (27″) $ 40.00.

Both Cords Measure 20 Feet.

The velcro on your popup camper takes a beating. Work in slow clockwise motions so as not to damage the mechanics. Measure it and replace it with a new length of the same diameter cable.

Dealers Wanted $110 An Hour To Attempt Repair.

We removed the old center trim piece and replaced with new stainless steel screws, set also in place with a drop of gorilla glue. Comes with (2) 80 inches sections of shock cord, and (4). Replacement push nut for the slider function on bed support poles.