How To Rebuild A T10 Transmission. Others have them only bolt to the mid plate. Once the tailhousing bolts are removed, carefully pull the tailhousing away from the maincase.
Main case bearings, gaskets, seals. Small parts include needle bearings, snap rings, thrust washers, countershaft needle spacers, tapered pin, roll pin and woodruff key and. Then there is an s series 2.43 and a w series 2.64 which are listed as aftermarket.
Slide The Main Shaft Out The Back Of.
This was installed in a 1975 corvette during an automatic to 4 speed conversion.get the book here! Drive out reverse lock pin. Once the tailhousing bolts are removed, carefully pull the tailhousing away from the maincase.
Information And Parts Are Provided For The Following Transmissions:
Others have them only bolt to the mid plate. The correct quality t10 manual transmission parts the first time. Pull input shaft out of case
If You Are Replacing A 4 Speed Or A Turbo 350 With A Super T10 Or Super T10 Plus, You Will Be Able To Use Your Original Speedo Driven Gear Holder.
It is located with a keyway and can only come out the backside of the transmission. Completely rebuilding a transmission involves removing the transmission and completely disassembling it.each component is inspected for damage or excessive wear.ford m5r1 manual transmission. This takes the load off the countergear and allows the shaft to be easily removed.
According To Performance American Style There Are Two Gear Ratios For The 2.64 And 2.43 Transmissions, A P' Series 2.43 And A T Series 2.64 Which Are Listed As Production.
Don’t be concerned about needle bearings falling out of the case. Main case bearings, gaskets, seals. Then there is an s series 2.43 and a w series 2.64 which are listed as aftermarket.
Syncro Rings Are Included In These Kits.
Some of the earlier gm’s had a shifter centerline at 17.5”, which we do not make a shifter for. Seals, bushings and washers, individual bearings, synchro rings and slider, ring kits. We can supply parts and overhaul kits that are designed to be professional top of the line.