How To Put Aftermarket Radio In 2006 Equinox

How To Put Aftermarket Radio In 2006 Equinox. I just put in an aftermarket stereo in my 2006 durango. Adapts factory antenna plug into aftermarket style;

2006 Chevrolet Equinox AM FM Radio 6 Disc Player OEM from www.1factoryradio.com

Can you install an aftermarket car audio system on your own? One wire goes to the vehicle’s electrical system. The digital display will read loc if the radio is locked.

Gm Car Radio Harness Plugs Into The Factory Radio General Motors Into Oem Radio Power And 4 Speaker Fully Pinned 24 Pin Plug And 12 Pin Plug :

On the equinox, there are two sets of wires grouped by two wiring harnesses as well as the antenna wiring. Ideal for any aftermarket radio; The digital display will read loc if the radio is locked.

Step 1, Choose A New Stereo.

Yes, it is quite possible to install an aftermarket car audio system on your own. For a successful installation you will need some additional pieces that may or may not come with your stereo. The problem is that i was told that i need a $150 scoche interface adapter to wire this radio in.

There Is A Spacer Ring That Comes With The Adapter You Have To Put In First, Then Put The Cage In And Lock It Into Place By Bending Over The Metal Tabs Of The Din Cage.

American international installer preferred wire harnesses are a vital link between. Simply remove the plastic bezel surrounding the radio, unscren the factory radio, and screw this one in it's place. This is probably the most straightforward solution.

Read >>  2006 Chevy Silverado 1500 Crew Cab Subwoofer Box

I Tested The Cd And Am/Fm Radio, And Am Very Pleased With The Improvement Over The Stock Radio.

It also shows you the car radio wire to battery, which wire is positive, what is car radio illumination wire and more. Replace the screws to hold the new stereo. Find the sunroof fuse(even if you dont have one its probably in there) and use that for your switched 12v(red wire) these cars use class ii data to turn on the radio, the non chime harness doesnt interpret class ii and provide a switched 12v so you have to tap a fuse that is switched.

Adapts Factory Antenna Plug Into Aftermarket Style;

You will loose the radio info on the dic though. Ok man what you need to do is tap a fuse that only works when the car is on. Put your key in the ignition and turn on your radio.