How To Mount A Kirkey Race Seat

How To Mount A Kirkey Race Seat. My kirkey seat is bolted to the floor and rear bar just below where the belts are bolted. First, it minimizes belt stretch, and second, it still allows the belts to come up and over the shoulder, and when tightened will pull the driver down into the seat securely.

Fox body seat bracket (Universal) CJ Race Cars from cjracecars.com

Beacuase i realy want a low profile race seat that i could move forward and back. Cut out bumps, the floor pan is shaped like this because of the awd tranny, so its uneeded. The brackets will bolt into your mustang and allow you to run anywhere from a 15 inch to a 20 inch kirkey drag seat without having to fabricate custom mounts.

99203 & 99204 Seat Mount Bracket Installation Guide.

To actually fasten the seat to the floor, we used some 1/4 thick 3 dia discs with a 1/2 hole drilled in the center. Our mounts are cut from 1/8 steel with slotted adjustments for the front side mounting holes which mount on the side of the seat. Kirkey racing aluminum adjustable road race seat.

Read >>  How To Fix Hair On Deer Mount

Seat Brackets Kirkey Specifically Warns Against (And States Not To) Install Braces On The Back Of The Seat Or Headrest Because They Fear People May Engineer Stabbers Or Other Rigid Members That Will Not Fold Up So Nicely In A Collision, Causing Injury.

Beacuase i realy want a low profile race seat that i could move forward and back. 99202, 99207, 99208 & 99209 rear seat mount bracket installation guide. As anyone done this with a kirkey.

Price Is For A Set To Mount *One* Seat.

Kirkey seats are designed to be mounted to a seat bar, not strong enough for floor mount only. My kirkey seat is bolted to the floor and rear bar just below where the belts are bolted. 1.5 spreader washers are also available to spread the loads on the bolts.

And Like Mike Said, A Couple Of Mins And It Can Be Completely Out Of The Way.

You must know how to weld or have someone weld. Carriage bolts were used to come up thru the plates and bolt to the seat brackets. Have driver sit on bench or table with legs hanging over side, measure width of hips through center line of body side to side.

Just Drilled The Holes Where There Was A Good Mounting Point.

Kirkey's seat brackets will mount your seat to your existing race vehicle. Designed for road race cars, kit cars, club racing. 99212 rear seat mount installation guide.

Read >>  Car Seat Covers For 2013 Kia Sorento