How To Measure Leaf Spring Lift

How To Measure Leaf Spring Lift. Measure the width of the spring. With the explorer springs and no lift blocks, the same spot measured 32 inches above the floor.

Rear Shackles Size Chart and Information Blazer Forum from

I had a set i picked up and called skyjacker to find out what size the were, they told me run a string eye to eye then from the string to the bottom of the leaf pack and that is what size it is, if they are off the truck then they will be a couple inches off unloaded. A.) follow the curve of the spring, measuring from the center of the front eye back to the center bolt. Remember, measure twice, order once.

On All 9 Pack Leaf Springs The Military Double Wrap Will Face The Front Of The Vehicle.

The length of the stock front spring is 44.125. Drive the bolt out of the spring and shackle with a drift. “24 inches x 24 inches” or maybe “21 inches by 27 inches,” depending on your measurements and center bolt location.

Read >>  How To Open Gas Tank Volkswagen Jetta

The Other Common Mistake When Replacing Leaf Springs Is Proper Shackle Angle.

All of these springs measure 64” from eye center to eye center along the arch. The height of the spring and the distance from the spring eye to the center of the spring can also be helpful in. Im not sure they even make a 10 rear spring?

Simple, You’re Only Lifting 1 Side Of The Spring (Ie 50%).

First, you want the rear leaf springs. The easiest method to gauging the proper size and length shock is to measure your existing shocks. It is common for a.

Even More Links Position The Axle Side To Side.

A 4 lift spring is about 48.5 measure along the curved length of the longest leaf (from eye to eye). Measure the width of the trailer spring. When you are looking to repair, replace or upgrade your leaf spring suspension, smart suppliers will ask you relevant questions about what suspension you cur.

Increasing Or Decreasing Your Shackle Angle Will Have A Dramatic Effect On How Your Suspension Functions Including:

To determine the width, simply measure along the center of the top leaf. Lay a string on top of your main leaf, being careful to get the length right and follow the bend of the spring (truck on jack stands wheels off, jack stands under. Tape measure right down the center of the hub at a right angle to the ground draw a line on masking tape at 31, crank t bars until measurement is 32 or whatever, bring the other side to read the same best way to measure actual before and after lift, whether its body, suspension or tires is at the fender, center of the wheel hub.

Read >>  2000 Honda Accord Fuel Filter Replacement