How To Connect Gusodor Led Strip Lights To Phone. Make sure both the phone and light strip remain connected to the same network for the app to. In the gamepad module, each button has a different function corresponding to the rgb led strip.
Click “+” to add a device, select the strip light model “h6159” to connect. These strips are a bit different because, though they have the same number of led modules (300) in a 16.4 foot roll, they actually have three times the light emitting diodes as regular led strips. In here, you may see respective wires as red, green, blue, and black.
Peel The Top Layer Off To Expose The Ends.
How to use smart led strip lights with ez mode step 1: Turn on the led strip lights and wait for 10 seconds. Then, you need to associate your mobile phone with the leds to pair them.
Just Turn On The Phone’s Bluetooth, Then Open The Happy Lighting App, And Click Connect To Your Device.
Then, connect 4 pins male connector into the led strip’s female connector. The android app dabble on your smartphone is used to control the rgb led strip. Before starting the connection, make sure that your phone or device is connected to the correct wifi you want to connect with your lights.
Once The Led Strip Is Flashing Slowly, Tap The “Confirm Light Blinks Slowly” Button.
Click “+” to add a device, select the strip light model “h6159” to connect. If no any problem, you success connect your led lights to your phone! In here, you may see respective wires as red, green, blue, and black.
Select A Wifi Network And Enter The Password Of The Network.
Step 1.connect the light strip correctly and power on. Once you reach the home page, you should click on the plus (+) sign to move to the “add the device” tab. Slide the end of the strip into one end of a connector clip and snap it shut.
As Far As Music Mode Is Concerned, You Need Not Connect The Strips To Bluetooth Or Any Other Device.
Most of the time, you will find out that the settings do not display any pairing. You should now be in the “smart lighting” division. Use connector pieces to keep the strips flush in the corners.